中文 | 0086-15380092122dryermarket@outlook.com

How to keep the moisture content of the dryer after drying

Date: 2018-03-12 | Hits:
Tags: How to keep the moisture content of the dryer after drying
Drying equipment will evaporate the water in the material, in the subsequent preservation, for some special materials need to be strictly preserved, to prevent the moisture content of the air caused by the increase in moisture content.

The first aspect is the choice of a three-cylinder dryer. Under the premise of satisfying the customer's hourly output and site area, the customer chooses a 2m*3m three-cylinder dryer because the customer does not understand the device. The initial doubt was that the dryer cylinder would not be too short. The 3-meter three-cylinder dryer is equivalent to a 9-meter single-cylinder dryer. After giving some technically reasonable explanations, the customer agrees with our proposal.

The second aspect is the moisture content of the material after drying. For the requirement of 1%, the three-cylinder dryer can meet this standard, but after the drying, the water content of the material will not be saved if it is stored in a timely and reasonable manner. Rise, greater than 1%. The customer was obviously disappointed when he heard that the material could not be kept within a moisture content standard. Then our staff patiently told the consultant about the corresponding solution. The dried material was stored in a vacuum environment. The equipment completely withdraws the packaged air from the stored material.

Copyright © 2018 Jiangsu Guojin Drying Technology Co., Ltd Design By:EastNet [Manage]
Top