Location: > Product Center > Drying

Drying

Product Center

YPG series pressure spray (cooling) dryer

Introduction: product descriptionThis unit is a device that can complete drying and granulation at the same time. According to the process requirements, the pressure, flow rate, and size of the nozzle hole of the feed liquid pump can be adjusted to obtain the requi…

Hotline: 0086-15380092122
Inquiry

product description
  This unit is a device that can complete drying and granulation at the same time. According to the process requirements, the pressure, flow rate, and size of the nozzle hole of the feed liquid pump can be adjusted to obtain the required spherical particles in a certain size ratio.

working principle
  The working process of this unit is that the material liquid is input through the diaphragm pump at high pressure, spraying mist-like droplets, and then descending in parallel with the hot air. Most of the powder particles are collected by the discharge port at the bottom of the tower, and the exhaust gas and its tiny powder are separated by the cyclone separator. , The exhaust gas is discharged by the exhaust fan, and the powder is collected by the pollination tube set at the lower end of the cyclone separator. The outlet of the fan can also be equipped with a secondary dust removal device, and the recovery rate is above 96-98%.


Schematic

压力式喷雾干燥机结构示意图
Performance characteristics

◎The drying speed is fast, and the surface area of the material liquid is greatly increased after atomization. In the hot air flow, 95%-98% of the water can be evaporated in an instant, and the drying time only needs ten seconds to tens of seconds, especially suitable For the drying of heat-sensitive materials.
◎All products are spherical particles with uniform particle size, good fluidity, good solubility, high product purity and good quality.
◎Wide range of application, according to the characteristics of the material, it can be dried with hot air or granulated with cold air, which has strong adaptability to the material.
◎Simple and stable operation, convenient control, easy to realize automatic operation.

Adapt to materials
Spray-dried granules:
◎Chemical industry: There are catalysts, resins, synthetic detergents, oils, ammonium sulfate, dyes, dye intermediates, white carbon black, graphite, ammonium phosphate, etc.
◎Food: amino acids and analogues, seasonings, proteins, starches, dairy products, coffee extracts, fish meal, meat essence, etc.
◎Pharmaceuticals: Chinese patent medicines, pesticides, antibiotics, pharmaceutical granules, etc.
◎Ceramics: Magnesium oxide, porcelain clay, various metal oxides, dolomite, etc.
◎Spraying granulation: all kinds of fertilizer, alumina, ceramic powder, pharmaceutical, heavy metal superhard steel, chemical fertilizer, granular washing powder, Chinese patent medicine.
◎Spray cooling granulation: amino fatty acid, paraffin wax, glycerate, tallow, etc. It is often used in spray crystallization, spray concentration, and spray reaction.

Technical specifications

model unit 50 100 150 200 300 500 1000
Water evaporation kg 50 100 150 200 300 500 1000
Dimensions(Ф×H) mm 1600×8900 2000×11500 2400×13500 2800×14800 3200×15400 3800×1880 4600×22500
High pressure pump pressure mPa 2~10
power KW 8.5 14 22 24 30 82 30
Inlet air temperature oC 140~350
Product moisture content % <5(Reachable0.5)
Material recovery % >97
Electric heating KW 75 120 150 When the temperature is lower than 200, according to actual technology
Electricity plus steam Mpa+KW 0.5+54 0.6+90 0.6+108  
Hot stove Kcal/h 100000 150000 200000 300000 400000 500000 1200000

★The above evaporation capacity is the upper limit of evaporation capacity.

Photo Gallery
  • Pressure spray (cooling) dryer
  • Pressure spray (cooling) dryer
Application Customers
Video Collection

    No record yet.
Animations

Related Projects
No record yet.
Relevant Articles
Related Products

Copyright © Jiangsu Guojin Drying Technology Co., Ltd. All rights reserved [Manage]
.Support: Eastnet Network support:China Drying Equipment

Scan QR code