Introduction: QG series pulse air dryer product description The QG series pulse air dryer is a large-scale drying equipment. It adopts the principle of instant drying. It uses the rapid movement of the hot air to drive the wet materials and suspend the wet material…
QG series pulse air dryer
The QG series pulse air dryer is a large-scale drying equipment. It adopts the principle of instant drying. It uses the rapid movement of the hot air to drive the wet materials and suspend the wet materials in the hot air. This strengthens the entire drying process and improves In order to achieve the rate of heat and mass transfer, the unbound moisture of the materials dried by airflow can almost be removed (for example: the water content of starch and other materials is less than or equal to 40%, and the finished product can be 13.5%), and the dried material , There will be no deterioration, and users can achieve higher economic benefits in a short period of time.
Scope of application
The company manufactures QG air drying equipment. After unique design, it has reached a higher level. This equipment has high automation, low investment, low energy consumption, less manpower and plant area, and a wide range of general applications. It is an ideal modern equipment. .
QG air dryer is suitable for drying and dehumidifying powdered materials in pharmaceutical, chemical, food, building materials, plastics and other industries, such as starch, fish meal, salt, distiller’s grains, feed, gluten, plastic resin, mineral powder, coal powder, sugar Drying of various materials such as chloric acid, A·S·C benzoic acid, 2.3·acid, polychloroacetic acid, polypropylene, sodium sulfate, sodium metabisulfite, etc.
Our company consults externally on airflow drying equipment, and designs and manufactures non-shaped airflow dryers on behalf of them.
|Number of units||1||1||1||2||2|
|Replacement time(h)||200(Filter bag)||200(Filter bag)||200(Filter bag)||200(Filter bag)||200(Filter bag)|
|Number of units||1||1||1||2||4|
|way to control||Electromagnetic speed regulating motor||Electromagnetic speed regulating motor||Electromagnetic speed regulating motor||Electromagnetic speed regulating motor||Electromagnetic speed regulating motor|
JG series air dryer
JG series air dryerIt can quickly remove water (mainly surface water) from particles and powder materials that are easy to dehydrate. In airflow drying, because the material stays in the dryer for a short time, the quality of the dried product can be better controlled. The enhanced airflow drying in our factory is composed of an intensifier whose speed can be adjusted steplessly on the basic model. After the wet material enters the intensifier through the screw feeder, it is fully mixed with the hot airflow, and is crushed and pushed forward by the rapidly rotating blade. The material is broken into fine particles, and moves to the outlet while drying, and then enters the drying tube under the suction of wind, and further uniformly dried. The wet and heavy particles that cannot be attracted by the wind continue to be crushed and dried until they can be sucked into the drying tube by the wind.
The main purpose
This machine is particularly suitable for materials with relatively large moisture content, wet materials in paste form, materials that cannot be dried by other air drying methods, such as: white carbon black, copolymers of vinyl acetate and vinyl chloride, acetate fiber flocs, catalysts, CMC , CT-1 resin, forging plaster, electrolytic manganese dioxide, ammonium anthraquinone sulfonate, fluorspar, diatomaceous earth, silica gel catalyst, bone meal, high territory, potassium perchlorate sulfonium drugs, synthetic resin, active gluten, active White clay, chemical filter cake, rutile white powder, sebacic acid, copper sulfate, aluminum sulfate, sodium sulfate, calcium phosphate, phosphated starch, dyes, calcium citrate, coal slime, dough-shaped bread, rice bran, clay , Clay cement, urea, bentonite, spherical clay, aluminum hydroxide, barium hydroxide, calcium lactate, food, washed high territories, cyanuric acid, gypsum slurry, lime, biological products, carbon black, calcium carbonate slurry, sludge Residues, organic chemicals, aluminum stearate, iron oxide, organic fuels, corn gluten feed, wet mud, mica powder, pharmaceuticals, pigments, potassium dichromate pulp, vinasse, etc.
(Calculated by surface moisture)
|Installed power kw||Land area m2||height m|
|Note: Those marked with * are secondary drying, installed power, and floor space are calculated by steam heating.|
FG series air dryer
FG series air dryerThe working principle is to divide the drying of wet materials into two steps. The raw materials are first dried by a mixture of secondary drying tail gas and supplementary hot air. The used high-temperature and low-humidity tail gas is discharged out of the machine, and the dried semi-finished products are dried by fresh hot air with secondary negative pressure. The finished product after drying is measured and packaged. The used high-temperature and low-humidity tail gas is used as a primary drying, so as to complete a good cycle drying process. The supplementary hot air volume can be adjusted at will according to the needs, so the machine has a wide applicability.
Adapt to materials
This equipment is widely used for drying powder and granular materials in food, chemical, pharmaceutical, building materials and other industries. The products that have been dried with this series are: starch, glucose, fish powder, granulated sugar, sugar, wine tank, feed, gluten, plastic resin, coal powder, dyes, etc.
|model||Evaporated water(kg/h)||Installed power kw||Land area m2||Thermal efficiency (%)|